







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Inglewood Homeowners
A fence is the one exterior project you look at every single day, and in Inglewood that fence has a real job: it holds the property line, it keeps dogs and kids in the yard, and it blocks the noise and sight lines from a fairly busy street grid. Whether you’re replacing a leaning wood fence in Morningside Park or putting up a vinyl privacy fence around a corner lot near downtown, the difference between a fence that stands straight for years and one that starts sagging by the second season is almost always what happens below grade and how square the post line is set. Our technicians have up to 14 years of experience on residential fence work, we pull the permits your project needs and pass the inspections, and every estimate is written line by line so you know what the material and labor actually cost. Call (844) 320-4724 to schedule your free estimate. We answer 24/7.

It starts with knowing what you’re comparing. A 40-foot stretch of fencing is not one number – it’s posts, panels, gates, and remove-and-haul split into separate lines, and that’s how we quote it.
What Our Fence Installation Service Includes

We build and repair the full range of residential fencing, and we’ll tell you honestly which material suits your lot, your budget, and how much privacy you actually want. Here’s what each option means in practice.
Wood Fence
Wood is the most common fence around Inglewood homes, and for good reason: it’s repairable, it can be built to almost any height and style, and it can be stained to match a house. You’ll want wood when you want a classic privacy run, a custom gate, or a design that blends with an older home’s architecture. We build wood fences with proper post footings, set panel heights to match your goals and neighboring grade, and use materials rated for the mild, dry conditions here rather than stock lumber chosen at random.
Chain Link Fence
Chain link is the practical choice for clear property definition, pet containment, and keeping a side yard secure without blocking light or air. It’s the right pick when budget and durability matter more than looks, or when you’re fencing a long run along a driveway. We install chain link with tensioned top rails and set posts deep enough to stay true, and we can add privacy slats or a gate to match the rest of the property.
Vinyl Fence
Vinyl fencing gives you a clean, uniform privacy screen that never needs staining or repainting, which matters on a property where you’d rather not spend weekends on maintenance. It’s the right pick for newer builds and for homeowners who want a crisp, consistent look along a street-facing yard. We install vinyl panels with reinforced bottom rails and set them so the fence line runs true, using brands like Barrette and Master Halco whose components are built to hold color and shape.
Aluminum Fence
Aluminum fencing is the go-to for a front-yard boundary that defines the property without creating a heavy wall, and it holds up well without rusting through. You’ll want it where you need visibility and security together, like a corner lot or a pool enclosure. We install aluminum systems from brands such as Ameristar, set with correct post spacing and gate hardware, and we’ll match rack heights to a sloped yard instead of forcing level panels onto a grade that doesn’t cooperate.
Iron Fence
Wrought iron and decorative iron fencing deliver the security and curb presence that aluminum can’t quite match, and they suit homes where architectural character is part of the plan. You’ll want iron when you’re fencing a front yard you want seen, or protecting a garden or entry court. We install iron fencing with proper anchoring and finish care so the fence stays solid and the coating holds, using Jerith systems where a decorative iron look with a factory finish makes sense.
Fence Repair
Not every fence needs replacing. A leaning post, a broken picket run, a gate that drags, or storm damage to a section can often be repaired for a fraction of a new fence. We assess the whole line, not just the damaged panel, and tell you whether a repair will hold or whether the posts underneath are already done. That honest call saves homeowners money more often than it costs them.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Fence systems from different manufacturers wear differently, and knowing where each one fails saves you from replacing a panel that could have been repaired. Barrette vinyl is a common sight on newer residential builds, and we know which rail and post connections take the most stress on a long run. Master Halco chain link and vinyl components are widely used across Southern California, and we’re familiar with their post and fitting dimensions as well as how their panels behave when a gate is hung at the end of a line. Ameristar aluminum systems are common for front-yard boundaries, and we know their rail and picket profiles well enough to match sections and hardware. Jerith iron fencing shows up on homes where the entry matters, and we understand the anchoring and finish care those systems need.
We work across this range of brands because material choice should follow design, warranty tier, and budget, not which supplier happens to be convenient that week. Whether you have Barrette, Master Halco, Ameristar, Jerith, or any other make, we can help with installation or repair.
Signs You Need Fence Installation Right Now
Fences rarely fail all at once. They give you warnings first, and most of them are things you can see from the yard.
- Leaning or loose posts. A post that rocks when you push it has lost its footing, and once one goes the panels on either side start to rack. Left alone, a single bad post turns into a full run of replacement.
- Rot at the base of wood posts. Soft, spongy wood at grade means the post is losing structural strength where the ground holds it. It’s easy to miss until the fence tips, so push a screwdriver into the base and see how it feels.
- Cracked or missing panels. Vinyl and composite panels can crack at the rail or shatter when struck, and a missing panel is an open gap. It’s both a security problem and a reason a neighbor’s dog ends up in your yard.
- A gate that drags or won’t latch. A dragging gate usually means the post it hangs from has moved, not that the hinge failed. Fixing the post is the real repair, and it protects the gate from further damage.
- Rust streaks or coating failure on metal. Surface rust on a chain link or iron fence spreads along the post line and past the gate frame. Catching it early is a repair; catching it late is a replacement.
Our Fence Installation Process – Step by Step
Every fence we build follows the same sequence, and you’ll know what’s happening at each stage before it happens.

- 1
Site walk and property check. We walk the line with you, confirm where the property boundaries actually run, and talk through privacy goals, gate placement, and slope. If a setback or height rule applies, we flag it before anything is ordered.
- 2
Written estimate and material choice. You get a line-item quote for posts, panels, gates, and removal, with brand and material options so you can see what each choice adds. We don’t lock you into a single supplier: you choose the material, we handle everything else.
- 3
Permits and utility marking. Most fencing requires a permit and a check on where utility lines run, so we handle the paperwork and layout marking before the first hole is dug. Digging blind is how water and gas lines get hit.
- 4
Post setting and layout. Posts go in first, set to depth and plumb with proper footings, and the line is strung and squared before panels go up. This is the step that decides whether the fence stays straight, so we don’t rush it.
- 5
Panel, gate, and final inspection. Panels, rails, and gates go in, hardware gets adjusted so everything swings and latches cleanly, and we clean the site. If an inspection is required, we walk it through and confirm it passes before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Inglewood?

Most vinyl fence installation in Inglewood runs an estimated $3,500 to $9,000 depending on the linear footage, panel style, and whether old fencing has to come out. Aluminum fence installation typically runs $4,000 to $10,000, driven mostly by the run length, the number of gates, and how much racking a sloped or corner lot requires. Those are the two ranges homeowners ask about most, and they’re typical estimates: the written estimate sets the final price.
What moves the number: total linear feet, fence height, gate count and hardware, whether the old fence is hauled away, slope and how much grading the posts need, and material choice. A simple straight run in the backyard costs far less than a front yard with a pedestrian gate and a driveway gate on sloped ground.
How to avoid overpaying: get a line-item estimate, not a lump sum. Ask separately for posts, panels, gates, removal, and permits, and compare the same scope across bids. A low quote that leaves out removal or footing depth isn’t a better price – it’s a smaller job.
Every free estimate includes a walk of the line, a material and brand conversation, and a written scope you can keep. Permits and inspection costs are itemized when they apply, and the price you agree to is the price on the job.
Fence Installation Near Inglewood – Our Service Area
We install and repair fences across Inglewood and the surrounding areas, including Lennox, View Park-Windsor Hills, Hawthorne, Del Aire, Culver City, Lawndale, El Segundo, and the Los Angeles neighborhoods that border the city. Whether you’re in Morningside Park or closer to the Crenshaw corridor, a nearby job gets a quick site visit; farther out, we schedule the walk with you. If you’re comparing materials across nearby towns, you can also read about fence installation in Lennox. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Inglewood, CA – Our Local Coverage Area
We serve Inglewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Inglewood

Fence installation is the process of setting posts, hanging panels and gates, and securing a property boundary at your lot line. It covers the whole job: layout, utility checks, post footings, panel and gate hardware, and cleanup. For wood, vinyl, chain link, aluminum, and iron, we handle it under one contractor so the fence, gate, and hardware all match.
A straight run of residential fencing usually takes one to three days once the posts are set, and larger properties with multiple gates can take longer. Post setting is the slow part because the footings need to cure correctly before panels go on. So the schedule depends on total linear feet and gate count. Call (844) 320-4724 for a timeline specific to your property – estimates are free.
Estimated vinyl fence installation in Inglewood runs $3,500 to $9,000, and aluminum fence installation typically runs $4,000 to $10,000. Your final price depends on linear footage, height, gate count, removal of the old fence, and how much slope the line crosses. The written estimate sets the final price. Call (844) 320-4724 for an exact quote – estimates are free.
Yes. We install and service fence systems from Barrette, Master Halco, Ameristar, Jerith, and other makes. Matching an existing panel or gate hardware is usually a matter of identifying the brand and series, which we do during the site walk. Tell us the brand if you know it, and we’ll confirm what fits.
We can often help with a same-day visit for a fence that’s failing, particularly a post or gate issue. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 320-4724 and we’ll book your fence installation or repair into the next opening – the estimate is free either way.
We back our installation work with a workmanship warranty, and the fence material carries its own manufacturer warranty. Those are two separate protections, and you should know what each covers before signing: the material warranty covers defects, while the workmanship warranty covers how it was set and hung. We walk you through both at the estimate.
Start by identifying the property lines and clearing the fence line of plants, patio furniture, and anything that blocks access to the posts. If you have a recent survey or plot plan, have it out during the site walk. We’ll handle utility marking and the permit, but only you can confirm the line with your neighbor before work starts.
Schedule Your Fence Installation Service in Inglewood Today
Call (844) 320-4724 to schedule your free estimate. We answer 24/7, and our technicians have up to 14 years of experience. You’ll get a written, line-item quote for your Inglewood property, material and brand options to compare, permits pulled and inspections passed where required, and a workmanship warranty on the install. There’s no obligation on the estimate.
Written by the team at Construction Inglewood.












