







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Manhattan Beach
If you’re planning a fence in Manhattan Beach, the first thing that decides how long it lasts isn’t the lumber or the panel style. It’s the air. The marine layer and salt-laden onshore breeze here attack fasteners, brackets and post bases years before inland hardware would ever show wear, and we specify every fence job around that reality. Our technicians have up to 14 years of experience and know the difference between a fence built to survive the sand section and one that only looks finished on install day. Whether you’re on a flat lot near The Strand or up in the hill section, we’ll walk the property, talk materials honestly, and give you a written estimate. Call (844) 320-4724 to schedule your free estimate.
Why Manhattan Beach Homeowners Call Construction Inglewood for Fence Installation

We keep a strong local reputation across Manhattan Beach because we treat the coast as a construction condition, not scenery. Homeowners here ask hard questions about hardware and material lifespan, and we answer them with brand names attached – Barrette vinyl systems, Ameristar aluminum and iron, Master Halco components – rather than vague claims. Our technicians have up to 14 years of experience reading the specific failure patterns that salt air creates in Manhattan Beach yards, and that shows up in what we recommend before a single post goes in.
Response time to Manhattan Beach is quick because it sits inside our primary service area alongside Inglewood, Redondo Beach and the rest of the South Bay. Our technicians have worked the flat sand section and the hill section enough to know that fence height, view lines and lot width all get discussed before the first hole is dug. If a gate is sagging or a post base has gone soft, we can look at it fast and tell you whether a repair is realistic or the structure has run its course. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. When you want a straight answer about your fence, call (844) 320-4724 and we’ll get you a free written estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Manhattan Beach
Every property here has its own exposure. A fence on a 40-foot-wide lot a few blocks off the water faces more salt spray than one tucked up toward Sepulveda, and the material plan should reflect that. These are the fence services we handle most in Manhattan Beach.
Privacy Fence in Manhattan Beach
Privacy is the most requested fence goal in Manhattan Beach, and it’s also the one most likely to run into a height limit under the city’s view-protection and daylight-plane review. We build wood and vinyl privacy fences sized to what your lot allows, then set the posts with heavier footings and hot-dip or stainless hardware so the screen stays upright against the coastal air. If you want maximum screening without fighting a height rule, we’ll help you find the right panel style.

Fence Repair in Manhattan Beach
Most fence repair calls in Manhattan Beach come down to hardware, not wood. Galvanized hinges, latches and post brackets pit and seize from the salt-laden onshore breeze, and then the gate sags because the metal gave out first. We pull the compromised posts, reset them with proper footings, cap and seal the cut ends, and refasten the rails so the structure holds. Sometimes a few targeted repairs buy you years; we’ll tell you honestly which it is.

Aluminum Fence in Manhattan Beach
Aluminum fence is a smart fit for the coastal air because a good powder-coated finish resists corrosion far better than bare steel. We install Ameristar and Jerith aluminum systems with stainless fasteners for front yards, pool enclosures and property lines where you want openness with a defined edge. A typical aluminum fence installation in Manhattan Beach runs $4720 – $11800 depending on linear footage, style and gates.

Wood Fence in Manhattan Beach
Wood privacy fencing still fits the beach character of the original 1940s – 60s bungalows, and we build it to last by focusing on what fails first: the base of the posts. Cut ends and post tops left unsealed wick marine-layer moisture and rot from the bottom up, hidden until pickets start to lean. We seal every cut and set posts so water drains away from the wood.
Trusted Brands We Service in Manhattan Beach
The fence brands we install are chosen because they hold up to salt air and carry real manufacturer warranties. We work with Barrette for vinyl systems, Ameristar for ornamental aluminum and steel, Jerith for classic aluminum fencing and gates, and Master Halco components for chain link and gate hardware. We don’t stock parts or operate a warehouse – we spec the right materials for your Manhattan Beach property and coordinate delivery to the job. You choose the material by design, warranty tier and budget rather than being locked into a single supplier, and we keep turnaround tight so your project moves. Call (844) 320-4724 for a free written estimate on any of these lines.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Manhattan Beach Homes
- Seized gate hardware. Galvanized hinges, latches and post brackets pit and seize from the salt-laden onshore breeze, and then the gate sags because the hardware – not the wood – gave out first. Swapping to stainless or marine-grade hardware is usually the fix.
- Rust bloom on inland-spec steel. Standard steel posts and fasteners near the beach oxidize within a few seasons, so a fence that would last a decade inland shows rust bloom and loosened joints far sooner here. Coastal spec costs more up front but stops the repeat rebuild.
- Rot from the sandy base up. Cut board ends and post tops left unsealed at the sandy-soil base wick marine-layer moisture and rot from the bottom up, hidden until the pickets start to lean. Sealing cuts and capping posts is the difference.
- Height and view conflicts. In the sand section, fences sit in sandy, fast-draining soil under the marine layer, and the city’s view-protection and daylight-plane review extends to fence height in many lots. A privacy request that would sail through inland can hit a height limit here.
Pricing for Fence Installation in Manhattan Beach, CA
Fence pricing in Manhattan Beach comes down to material and coastal spec. A vinyl privacy fence typically runs $4130 – $10620, and aluminum fence installation typically runs $4720 – $11800. Both are estimates only – the written estimate sets the final price. The gap between the cheap inland spec and the coastal version is fasteners, footing depth and sealing: the coastal build costs more up front but tends to cost far less over the years, because it isn’t rebuilt every few seasons. Linear footage, gate count, lot access and height limits all move the number. Call (844) 320-4724 to schedule your free estimate.
| Service | Typical Estimated Range |
|---|---|
| Vinyl Fence Installation | $4130 – $10620 |
| Aluminum Fence Installation | $4720 – $11800 |
We Also Serve Cities Near Manhattan Beach
Our fence installation service reaches the South Bay communities around us, including Redondo Beach, Torrance, Hermosa Beach and Lawndale. If you live just over the line, the same coastal material approach applies – the salt air doesn’t stop at the city limit. One contractor handles the full scope, so you’re not chasing down a separate vendor just to get a fence matched to the rest of the property. Our fence installation team can walk your lot and put a written estimate together.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Manhattan Beach

Gate hardware, not the frame, is usually what fails first in Manhattan Beach. Galvanized hinges, latches and brackets corrode and seize from the salt air, the gate stops swinging cleanly and starts pulling on the posts. Stainless or marine-grade hardware and a properly set gate post solve most of it.
Deeper footings help in the sand section even though there’s no frost line forcing it. The soil drains fast, but the salt-laden air oxidizes cheap hardware within a few seasons, so what protects the post is a heavier footing combined with hot-dip or stainless hardware and sealed cut ends. Ask us what the soil and exposure call for on your lot.
Salt air can attack aluminum and iron fencing, but a good powder-coated finish and stainless fasteners hold up well. Bare or poorly coated metal pits first. We install Ameristar and Jerith aluminum systems chosen for coastal exposure. Call (844) 320-4724 to talk through finishes for your property – estimates are free.
In many sand-section lots, yes – fence height can fall under the city’s view-protection and daylight-plane review. That’s why we check height limits before building a privacy screen and help you find a panel style that meets both your screening goal and the city’s rules. Call (844) 320-4724 for a free estimate.
Seal every cut end and cap the post tops, and set posts so water drains away from the wood. The boards usually fail last – it’s the untreated cut ends and post bases that wick marine-layer moisture and rot from the bottom up. We spec the base of the fence for the coast from the start. Call (844) 320-4724 to schedule your free estimate.
Ready to plan a fence that survives the Manhattan Beach marine layer? Call (844) 320-4724. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Every project starts with a free written estimate and clear material choices.
Written by the team at Construction Inglewood.












