







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Inglewood Homeowners
Windows and doors take the worst of what an Inglewood house faces. The afternoon sun off the flat roofs and asphalt on the north side of town bakes west-facing glass until the frames warp and the seals let go. Old single-pane aluminum sliders rattle in the Santa Ana winds and leak the cool air your system just paid for. When a window sticks, fogs between the panes, or a door no longer latches square, the fix isn’t cosmetic. It’s comfort, security, and a lower bill.

Construction Inglewood handles window and door work as one part of a full residential scope, so a replacement that turns into a stucco repair or a door that needs framing corrected doesn’t send you hunting for a second trade. Our technicians have up to 14 years of experience, and every job runs off a written line-item estimate. Call (844) 320-4724 and we’ll book your free estimate.
What Our Windows & Doors Service Includes

Window Installation
Window installation means cutting in a new unit where one didn’t exist before, or setting a full-frame replacement that includes the rough opening, flashing and trim. You need it when you’re adding a room, reconfiguring a wall, or replacing a window whose opening is out of square. We measure the opening, confirm the framing and flashing detail, and set the unit so water sheds the way it should in Inglewood’s dry-then-wet seasonal swing.
Door Installation
Door installation covers entry doors, interior doors and the framing that holds them. You need it when a door has swelled, when the jamb is rotted at the threshold, or when you’re upgrading to a better-sealed entry. We set the frame plumb, hang the slab to an even reveal, and fit the hardware so the latch catches without a shoulder to it. Therma-Tru entry systems are one of the product lines we work with when you want a factory-sealed door and frame together.
Window Replacement
Window replacement swaps out failing units for new ones in the existing opening, usually without disturbing interior finishes. You need it when glass is fogged, frames are cracked, or the units simply no longer close tight. We pull the old unit cleanly, check the sill for water damage, and install the new window with the correct flashing and sealant so the wall stays dry.
Impact Windows & Doors
Impact windows and doors use laminated glass and reinforced frames rated to resist flying debris and wind-driven rain. You need them where the building code or your insurer calls for them, or where you want the extra security. We install impact-rated assemblies with the anchoring the rating requires, and we’ll walk you through what the approval documentation means before anything is ordered.
Energy-Efficient Windows
Energy-efficient windows pair insulated glass with thermally broken frames to slow heat transfer in both directions. You need them when a room runs hot in summer and cold in winter no matter what the thermostat says. We help you match glazing and frame type to the exposure of each wall, so the west side of the house gets the right glass instead of a one-size unit everywhere.
Sliding & Patio Doors
Sliding and patio doors open a wall to the yard, and they take more wear than any other door in the house. You need a replacement when the track is worn, the rollers drag, or the glass has lost its seal. We install new sliders and impact sliding glass doors, set the track level so the panel glides, and confirm the threshold drains away from the house. Mr-Glass is a name we see on a lot of existing sliders around Inglewood, and we handle those replacements routinely.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We work with Therma-Tru entry doors because their factory-assembled frame and slab systems hold their alignment well, and we know where the weatherstrip and hinge-side seals are the first things to check when a door starts to draft. ViewLux windows come through our projects often enough that we’ve learned their frame profiles and how their glazing units behave after years of Inglewood sun. When a ViewLux unit fogs or its hardware loosens, we can source the right replacement parts and set them correctly rather than patching around the problem.
Mr-Glass sliding doors show up in a lot of older homes, and we understand their track and roller wear patterns – the bottom track is usually where the trouble starts. Whether you have Therma-Tru, ViewLux, Mr-Glass or any other make, we can help you replace or repair what’s failing. You choose the material and the manufacturer you want; we handle the measuring, the ordering and the install.
Signs You Need Windows & Doors Right Now
- Fog or condensation between the panes. That haze means the sealed glass unit has failed and the insulating gas is gone. It won’t clear on its own, and the window is no longer doing its job of holding heat out or in.
- Drafts around the frame or under the door. If you can feel air moving when the window is shut, the weatherstripping or the seal has broken down. In Inglewood that shows up as a room that won’t hold temperature and a utility bill that creeps up.
- Sticking, swollen or warped frames. A window that won’t open smoothly or a door that drags on the threshold usually points to moisture in the frame or a shifting opening. Left alone, the frame keeps moving and the hardware starts to fail.
- Cracked glass or a broken seal. A chip that spreads or a pane that’s lost its seal is a security gap and a water-entry point. Small glass damage is worth addressing before it turns into a full replacement.
- Water stains or soft wood at the sill. Staining on the interior sill or trim means water is getting past the window. The frame and the wall around it need to be checked before the damage spreads into the stucco.
Our Windows & Doors Process – Step by Step
- 1
Free on-site estimate. We measure every opening, check the framing and sill condition, and talk through the material options in your budget. You get a written line-item estimate, so you see what each window or door costs before you commit. No surprise line items once the work starts.
- 2
Product selection. You pick the manufacturer and the material from the brands we work with, and we confirm the specs against your wall type and exposure. We handle the ordering and the lead times, so you’re not chasing down a supplier.
- 3
Permits and scheduling. Where the work requires a permit, we pull it and schedule the inspection. We give you a clear install window and confirm what needs to move out of the way beforehand.
- 4
Installation. The old units come out, the openings get checked for rot and squared up if needed, and the new windows or doors go in with proper flashing and sealant. We set each unit level and confirm it operates smoothly before we move to the next.
- 5
Final walkthrough. We test every window and door with you, check the seals and the hardware, and clean up the work area. Any punch-list items get handled before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Inglewood?
Window replacement in Inglewood typically runs $4,500 to $15,000 depending on how many units you’re replacing, the frame material, and whether the openings need repair. A whole-house replacement with impact-rated glass sits at the upper end; a handful of standard units lands near the bottom. The written estimate sets the final price, and it’s itemized so you can see where the money goes.

What moves the number: the number of windows and doors, the glass package (impact-rated, energy-efficient or standard), frame material, and whether the rough openings need framing or stucco repair. How to avoid overpaying: get the estimate in writing with each unit priced, ask what’s included for flashing and trim, and don’t let a low bid turn into change orders later. What’s included in our free estimate is the measurement, the product options in your budget, and a fixed line-item price – permits and inspections handled where they’re required.
Call (844) 320-4724 to schedule your free estimate. Estimates are free and there’s no obligation.
Windows & Doors Near Inglewood – Our Service Area
We work across Inglewood and the surrounding communities, including Lennox, View Park-Windsor Hills, Hawthorne, Del Aire, Culver City, Lawndale, El Segundo, Los Angeles, Manhattan Beach, Marina del Rey and Hermosa Beach. Scheduling is straightforward, and most jobs are booked within a normal install window. For the broader picture of how window and door work fits with the rest of your property, see Construction Inglewood. Call (844) 320-4724 to confirm your address.
Serving Inglewood, CA – Our Local Coverage Area
We serve Inglewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Inglewood

It covers installation, replacement and repair of windows and doors across the whole house – entry doors, interior doors, sliding and patio doors, and every window type from standard sliders to custom and geometric shapes. We handle the measuring, ordering, installation and cleanup. If the opening needs framing or flashing work, that’s part of the same job. Call (844) 320-4724 for an exact quote – estimates are free.
Most replacement jobs take one to three days for a typical house, depending on the number of units and whether the openings need repair. A single door or a few windows can be done in a day. Custom and geometric windows or impact assemblies may add lead time for the product itself. We confirm your install window when we schedule. Call (844) 320-4724 to book your estimate.
Window replacement typically runs $4,500 to $15,000 in Inglewood, depending on the number of units, the glass and frame, and any repair work at the openings. Impact-rated glass and custom shapes sit toward the top of that range. The written estimate sets the final price, and it’s itemized so you know what each unit costs. Call (844) 320-4724 for an exact quote – estimates are free.
Yes – we install and replace Therma-Tru entry doors, ViewLux windows and Mr-Glass sliding doors, and we know their common wear points. We also work with other makes, so you’re not locked into one brand if your budget or design calls for something else. We’ll walk you through the options that fit your openings. Call (844) 320-4724 to talk through your project.
Same-day service is available for smaller repairs and single-unit replacements when the schedule allows. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (844) 320-4724 to check availability for your address.
You get two layers of coverage: the manufacturer’s warranty on the product and our workmanship warranty on the installation. The manufacturer warranty varies by brand – Therma-Tru, ViewLux and others each carry their own terms, and we’ll show you what applies before you order. The written estimate spells out both. Call (844) 320-4724 with questions about coverage.
Clear the area around each window and door, take down curtains and blinds, and move furniture a few feet back from the work zone. Secure pets in a room away from the install, and plan for minor dust at each opening. We protect the floors and cover the openings at the end of each day. Call (844) 320-4724 if you’re unsure what needs moving – we’ll walk you through it.
Schedule Your Windows & Doors Service in Inglewood Today
Call (844) 320-4724 to schedule your free estimate for windows and doors in Inglewood. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written line-item estimate, the brand options that fit your budget, and a crew that treats the rest of your property with respect. No-obligation, no pressure – just a clear price and a plan.
Written by the team at Construction Inglewood.












