







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Los Angeles
If you own a home in Los Angeles, you already know the fence at the back of the lot does more work than the front landscaping ever will. It marks the property line, keeps a dog in, gives the kids a boundary, and hides the neighbor’s second-story window. We handle the whole job: layout, HOA paperwork where it applies, permits, posts, panels, and gate hardware. We’re Construction Inglewood, we serve Los Angeles and the surrounding westside, and we answer the phone. Call (844) 320-4724 for a free estimate.
Why Los Angeles Homeowners Call Construction Inglewood for Fence Installation

Fencing is one of the seven residential service lines we run under one contractor relationship, which matters more than it sounds. When a fence shares a retaining wall with a driveway or abuts a structure that needs work, the same company already on the property can look at both. No finger-pointing between trades.
We work with eight fencing brands, including Barrette, Master Halco, Ameristar and Jerith, so you’re choosing material by design and warranty rather than taking whatever a single supplier happens to carry. Our technicians have up to 14 years of experience, and they’ve seen how westside builder-grade fences age compared to the older stock.
We know the master-planned tracts and the older unincorporated pockets behave differently. One has an architectural review committee checking color and height; the other usually doesn’t. Knowing which is which before we dig saves everyone a rebuild. If you want to talk through your property, call (844) 320-4724.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Los Angeles
Los Angeles lots come in a wide spread of sizes and shapes, and the right fence for a Culver City-adjacent corner lot is often the wrong one for a wide westside backyard. Here’s how we approach the four most common requests.
Wood Fence Installation
Wood remains the default privacy fence in Los Angeles neighborhoods, and for good reason: it’s repairable, it can be matched section by section, and it disappears into the landscape. We set posts in concrete at the right depth for the soil, use metal hardware instead of toe-nailed rails, and leave you a short punch list at the end so gate adjustments don’t turn into a project of their own.

Chain Link Fence Installation
Chain link is the practical choice for long runs, side yards and dog containment where privacy isn’t the goal. On Los Angeles properties that back up to alleys or open space, a galvanized chain link with a top rail holds up to the dry season without the maintenance a painted wood fence demands.

Vinyl Fence Installation
Vinyl gives you a clean look and no repainting. In Los Angeles’s long dry spell, a quality vinyl privacy panel doesn’t crack from sun exposure the way wood splits. A typical vinyl fence installation in Los Angeles runs $4130 – $10620, set by the written estimate.

Aluminum Fence Installation
Aluminum is what we specify when the HOA wants a consistent, low-maintenance look at the front of the house, or where a homeowner wants an open sightline without the rust-prone weight of iron. A typical aluminum fence installation in Los Angeles runs $4720 – $11800, set by the written estimate.
Trusted Brands We Service in Los Angeles
We partner with 50+ name-brand material suppliers across all our service lines, and fencing is no exception. Barrette, Master Halco, Ameristar and Jerith all make material that carries its own manufacturer warranty, so quality assurance extends past the install. We don’t stock fencing on a truck or keep a yard of inventory. We scope the job, order the material that fits the design and budget, and schedule the install around the delivery. That means turnaround time is honest: we tell you what’s realistic up front rather than promising a fence this afternoon.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Los Angeles Homes
The failures below are the ones we get called about most often. Most of them come back to how the fence was set, not how it looks on day one.
- Builder-grade wood failing early. On a newer tract home, the developer’s original cedar or fir fence is often the first outdoor element to go. The boards dry-split through the long semi-arid season and lean after the first real winter rain because the posts were set shallow.
- HOA architectural review skipped. In a master-planned development, a finished privacy fence can get flagged after installation for height, color or material non-compliance. Approval before a single post is dug avoids the rebuild.
- Posts set shallow in expansive soil. Westside soils move, and a post tied in too shallow fails at the base rather than the pickets. We check the depth against the soil before layout.
- Shared retaining walls and seismic load. Los Angeles sits in a high-seismic zone. Any fence that shares a retaining wall or abuts a soft-story structure needs its load-bearing implications checked before we finalize scope.
Here’s the local insight that matters most, and it doesn’t show up in a generic fencing article. In Los Angeles’s newer master-planned tracts, fences sit on a legally enforced side-yard setback line, and the HOA controls that line through an architectural review committee. So the color, height and material of a rear privacy fence often must be approved before a single post is dug. Newer developments near the westside and the newer Inglewood-adjacent tracts enforce this far more strictly than the older unincorporated pockets do. If you’re not sure which rules apply to your lot, that’s the first thing to sort out.
On a newer tract home, a typical job looks like this: the original builder-grade wood fence is usually the first outdoor element to fail, and a qualified local pro pulls the permits the HOA and the city require, verifies the property-line survey before layout, and sets posts in concrete at the correct depth with metal hardware rather than toe-nailed rails. The owner gets a punch list of gate adjustments at the end. And because Los Angeles sits in a high-seismic zone, any fence that shares a retaining wall or abuts a soft-story structure gets its load-bearing implications checked before scope is locked.
Pricing for Fence Installation in Los Angeles, CA

Fence pricing comes down to linear feet, material, gate count and how much site prep the soil demands. Here are the ranges we quote for the two most common non-wood choices:
| Service | Typical Estimated Range in Los Angeles |
|---|---|
| Vinyl Fence Installation | $4130 – $10620 |
| Aluminum Fence Installation | $4720 – $11800 |
Those are typical estimates, not fixed prices. Wood, chain link and iron land in similar territory depending on run length and gate hardware. What moves the number most is access on tighter westside lots, the depth posts must go in expansive soil, and whether a shared retaining wall needs engineering review. The written estimate sets the final price. There’s no change-order surprise once work starts. Call (844) 320-4724 for a free, line-item estimate.
We Also Serve Cities Near Los Angeles
The same crew handles fencing in View Park-Windsor Hills, Culver City, Beverly Hills and Lennox, where HOA review and setback rules can differ from Los Angeles proper. If you’re near one of those borders, our fence installation team will confirm which jurisdiction’s rules govern your fence line. Call (844) 320-4724 to schedule an estimate.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Los Angeles

Yes. In most newer master-planned tracts, the architectural review committee must approve the fence’s color, height and material before a post is dug. The side-yard setback line is legally enforced, so approval protects you from a rebuild. Call (844) 320-4724 and we’ll review your committee’s requirements with you.
Usually not, as long as the fence doesn’t alter the structure or void the specific item your builder covers. A fence is a site element; typical builder warranties cover the house itself. We document what we touch so your warranty boundaries stay clear. Call (844) 320-4724 to talk through your warranty.
Vinyl and aluminum handle the long dry spell and wind events better than builder-grade wood. Vinyl doesn’t split from sun exposure, and aluminum is light enough to resist leaning. Well-set wood still works if the posts are deep and the hardware is metal. Call (844) 320-4724 for a recommendation for your lot.
Often yes, especially for height above the standard limit, fences retaining soil, or work in a designated overlay zone. Always check with the city before you build. We walk you through the permit path and pull what’s required. Call (844) 320-4724 to start.
A typical tract lot takes a few days once material is on site, longer if HOA review or a shared retaining wall adds scope. Layout, post setting and gate hanging are the time-critical steps. We give you a realistic schedule up front. Call (844) 320-4724 for a timeframe on your property.
Fence material, HOA approval and property-line survey are the three things that decide whether the job goes smoothly. Sort them first and the install is straightforward. Call (844) 320-4724 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Inglewood.












