







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Inglewood Homeowners Choose Kohler Construction
We provide independent Kohler construction, repair and installation service in Inglewood, CA. That means we work on Kohler toilets, faucets, cast-iron baths, kitchen sinks and the rooms built around them, and we tell you honestly whether a fixture can be repaired or should be replaced. What sets our Kohler work apart is the pairing: a failed ceramic cartridge or a chipped enamel drain gets fixed on the same project that replaces the countertop and re-tiles the shower, so you’re not managing a plumber, a tile setter and a cabinet installer separately. Our technicians have up to 14 years of experience across Kohler fixtures and the broader remodels they sit inside.

We are not affiliated with, authorized by, or endorsed by Kohler, and we don’t represent any Kohler warranty. We’re an independent remodeling contractor who knows how these products are built. Call (844) 320-4724 to set up a free estimate.
Key Takeaways
- Independent Kohler service, repair and installation in Inglewood, with no manufacturer affiliation.
- We service Kohler toilets (Memoirs, Wellworth), faucets (Bellera, Simplice), cast-iron baths and Whitehaven and Cairn sinks.
- Genuine Kohler replacement parts where fit and longevity matter; quality aftermarket parts where they perform equally.
- Free estimate, written line-item quote, and the written estimate sets the final price.
Why Trust Construction Inglewood for Your Kohler Construction?

Our technicians work on Kohler fixtures and cabinetry often enough to know the difference between a worn flapper and a failing fill valve by sound and symptom, and to know when a Bellera or Simplice cartridge has scaled shut versus when the faucet body itself is going. That familiarity matters because Kohler products are built to be serviced, but only when the part matches the fixture. A cartridge that’s close but not correct seats crooked and drips again in a month.
Warranty-safe service is the other half. When we pull a Kohler cast-iron bath or re-seat a toilet, we use genuine Kohler replacement parts where fit and longevity depend on it, so the fixture keeps performing the way it was engineered. When we open a wall or floor around Kohler hardware, we photograph the condition before we close it back up, and we note any hidden issue in the written scope rather than springing it on you mid-job. If a Kohler fixture is intact, we repair and reseal it. If the enamel is compromised or a faucet body is failing, we lay out an honest replace path. You decide. The estimate is free, and the written quote spells out labor and materials so there’s no guessing.
Inglewood homeowners dealing with one failing Kohler fixture often find a second problem behind it. That’s where a single contractor across bathroom remodeling, showers and countertops pays off. You get one point of contact from the diagnosis through the finished room.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Inglewood
Kohler builds durable products, but Inglewood’s water, housing stock and marine layer all leave marks. Here’s what we see most often, and why it happens.
- Dripping or stiff Kohler ceramic cartridge faucets (Bellera, Simplice). The ceramic cartridge is the wear point. Inglewood’s water leaves mineral scale that hardens against the cartridge faces, and once that happens you get a drip at the spout or a handle that grinds instead of turning smoothly. Left alone, the drip etches the finish around the drain and drives up the water bill. A genuine replacement cartridge usually solves it without touching the faucet body.
- Chipped or rusting Kohler cast-iron enamel at the drain and overflow. Cast-iron baths are built to last decades, but the enamel is thinnest where the drain and overflow fittings cut through it. Long-term moisture at the drain seal, plus a missing or failed mortar bed under the apron, lets water sit against bare iron and rust starts. That same missing bed is why the apron flexes or creaks when you step in.
- Running Kohler toilets (Memoirs, Wellworth). A toilet that refills on its own is almost always fill-valve or flapper wear rather than a bowl problem. The flapper loses its seal, the fill valve keeps topping off, and the tank runs quietly for hours. It’s an inexpensive fix if you catch it before the supply line or shutoff starts weeping too.
- Slow drains from older Kohler low-flow bowls. Earlier low-flow toilets move less water per flush, and in homes with older cast-iron or galvanized drain lines that’s enough to let solids settle and slow the drain over time. We check the bowl and the line before recommending anything, because the fix is sometimes a drain issue, not the toilet.
- Loose or corroding Kohler sinks and bath hardware at the deck mount. Kitchen and vanity sinks, towel bars and trim loosen as the mounting hardware corrodes, especially on west-facing walls where salt air off the coastal plain does the most damage. When a Kohler sink or faucet deck mount works loose, the caulk and tile joints around it crack next, and that’s when water gets behind the backsplash.
If any of this sounds like your bathroom or kitchen, call (844) 320-4724. Estimates are free.
Kohler Parts & Our Repair-vs-Replace Approach

We use genuine Kohler replacement parts (cartridges, flappers, fill valves, trim) where they affect fit and longevity, and quality aftermarket parts only where they perform equally. We don’t stock OEM or genuine Kohler parts, and we’re not a Kohler dealer. We source what the fixture needs and tell you which parts are genuine and which aren’t before the work starts.
Repair or replace is a judgment call we make with you, not for you. If a Kohler cast-iron bath is intact with sound enamel, we repair and reseal it. If the enamel is compromised at the drain or the iron is rusting through, no amount of resealing holds, and we lay out a replacement path honestly. Same logic on faucets: a failing cartridge is a repair; a faucet body that’s cracked or corroded through is a replacement. We don’t push a full remodel to fix a $30 part, and we don’t patch a fixture that’s past saving.
Call (844) 320-4724 for a free estimate and a straight answer on which path makes sense.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We look at the whole fixture, not just the symptom. A dripping Bellera faucet gets its cartridge and valve seats checked, and a running Memoirs toilet gets the flapper, fill valve and supply line evaluated together. On a cast-iron bath or shower base, we check the drain seal, the overflow and the subfloor underneath for soft spots before we quote anything.
- 2
Repair or install. Genuine Kohler parts go in where they matter. When a fixture is being replaced or a bathroom is being remodeled around it, we set the new bath or shower base on a proper mortar bed with correct waterproofing, so the enamel stays supported and the apron doesn’t flex.
- 3
Test. Every faucet, valve and flush gets run under working pressure. We check for drips at the spout and handle, confirm the tank refills and stops, and verify the drain and overflow on a bath or shower hold without seeping.
- 4
Warranty and documentation. Any manufacturer warranty that comes with a new Kohler fixture stays with you, and we explain what it covers and what it doesn’t. Our workmanship is backed separately, and we leave you the written scope and any part numbers so a future service call starts from facts.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Inglewood

We handle the Kohler products that live in kitchens and baths: cast-iron and acrylic baths, shower bases and surrounds, toilets including the Memoirs and Wellworth lines, and faucets like the Bellera and Simplice, along with Kohler kitchen sinks such as the Whitehaven and Cairn. We install and service bathroom vanities, and we set the quartz and granite countertops and the tile and backsplash that surround Kohler sinks and fixtures.
Where a Kohler fixture is part of a larger room, we take the whole project: full bathroom remodeling, walk-in shower installation, and the countertop and cabinetry work around it. If you’re adding living space and want a bathroom specified from the ground up, we cover home additions and ADUs too. We don’t claim to carry Kohler inventory; we work with what your project needs and quote it clearly.
We Also Service These Brands
Kohler is one piece of what we do. We also work with KraftMaid cabinetry, GAF roofing, PGT windows and doors, and Master Halco fencing, among many other named manufacturers across our seven service lines. That range means you’re never locked into a single supplier to get a project done. If your bathroom has a Kohler toilet and a Moen shower valve, we handle both. If the kitchen needs KraftMaid cabinets and a Kohler sink, that’s one contractor and one quote.
FAQs – Kohler Construction Service in Inglewood
No. We are an independent remodeling contractor and we are not affiliated with, authorized by, or endorsed by Kohler. We service and install Kohler products because we know them well, not because Kohler approves the work. Any Kohler warranty that came with your fixture is between you and Kohler, and we’ll tell you plainly what it covers. Call (844) 320-4724 for a free estimate.
Yes, where they affect fit and longevity. We use genuine Kohler replacement cartridges, flappers, fill valves and trim on repairs, and quality aftermarket parts only where they perform equally. We tell you which is which before the work starts. Call (844) 320-4724 and we’ll walk you through what your fixture needs.
Yes. A tub-to-shower conversion is one of the most common projects we do, and it’s a good fit when a cast-iron bath has rusted or chipped at the drain and the subfloor underneath needs checking. We pull the tub, inspect and repair the subfloor, set the new shower base with proper waterproofing, then tile and glass. Typical tub-to-shower conversions run $3,500 – $10,000, and walk-in shower installation runs $4,500 – $12,000. The written estimate sets the final price. Call (844) 320-4724 for an exact quote; estimates are free.
Usually repair. A drip at the spout or a handle that’s stiff to turn is almost always the ceramic cartridge scaled up by hard water, not a failed faucet. A genuine Kohler replacement cartridge fixes most Bellera and Simplice drips in one visit. If the faucet body itself is cracked or corroded through, replacement is the honest answer. Call (844) 320-4724 and we’ll tell you which one you’re looking at.
Sometimes, but not always. The Whitehaven is an apron-front sink, which means the cabinet below has to be cut and modified to accept the apron, and the countertop edge is set back around it. We measure the cabinet run, the countertop and the plumbing before ordering anything, so the fit is right the first time. If your cabinet can’t take it, we’ll tell you what would work. Call (844) 320-4724 to schedule a free measurement.
Often, yes. Kohler finishes are made to coordinate, and if your existing fixtures are sound we can spec new Kohler pieces to match them rather than replacing everything. When a finish is discontinued or your fixtures are failing, we show you the closest matches and let you choose. We don’t claim to carry inventory, so we confirm availability before you commit. Call (844) 320-4724 for a free estimate.
Toilets, faucets, cast-iron and acrylic baths, shower bases and surrounds, kitchen sinks and the countertops, cabinetry and tile that surround them. We also handle full bathroom remodeling when a fixture failure turns into a bigger project. Call (844) 320-4724 to confirm your specific product.
A faucet cartridge or toilet flapper repair is usually a short single visit. A tub-to-shower conversion or a bathroom remodel around Kohler fixtures takes longer and depends on permit timelines, which in Inglewood can run longer than neighboring cities because of the stadium-area construction volume. We give you a realistic schedule with the written estimate, not a guess. Call (844) 320-4724 to talk through your timeline.
It depends on the scope. A Kohler fixture repair is the least expensive path; a full bathroom built around Kohler products is a larger project. Typical estimated ranges for the work we do alongside Kohler fixtures:
| Project | Typical Estimated Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Countertop Installation | $2,000 – $6,500 |
These are estimates, and the written estimate sets the final price. Call (844) 320-4724 for an exact quote; estimates are free.
Book Your Kohler Service in Inglewood, CA
Whether your Kohler bath is rusting at the drain, your Bellera faucet drips, or you’re remodeling a bathroom around Kohler fixtures, we’ll give you a straight answer and a written line-item quote. Call (844) 320-4724. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Construction Inglewood.












