







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Inglewood Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Inglewood, repairing, installing and reworking KraftMaid cabinetry with quality parts that fit the brand’s box construction, hardware drilling and finish options. What sets our KraftMaid work apart is the assessment that comes first: we tell you honestly whether your cabinets can be adjusted, refaced or reconfigured, or whether the boxes have reached the end of their useful life. Every job starts with a free written estimate.

Inglewood is mid-boom. SoFi Stadium, the Intuit Dome and the renamed Kia Forum pulled in major infrastructure money, and the construction story underneath that is the collision of mega-development with blocks of 1920s to 1950s bungalows and small stucco tract homes. Contractors here work a patchwork of new high-density zoning overlays and older residential permits inside the same square mile, and the permitting office carries a backlog from stadium-area volume. That reality shapes how we scope KraftMaid work in Inglewood: plan check can stretch, so the decision to reface or replace gets made carefully, before anything is ordered.
To be clear, Construction Inglewood is not affiliated with, authorized by or a dealer for KraftMaid. We are an independent provider. We work on KraftMaid cabinetry every week and know how the brand’s boxes, drawer hardware and finishes actually behave in real kitchens, not from a showroom brochure. Call (844) 320-4724 for a free estimate.
Why Trust Construction Inglewood for Your KraftMaid Construction?

Our technicians have up to 14 years of experience, and a good share of that has been spent inside KraftMaid cabinets. That matters because the brand spans very different construction. Vantage series cabinets are framed with particleboard boxes and standard door styles. Momentum and Momentum Pro are modular and semi-custom lines. Insight is all-plywood with full overlay. Chardon and similar raised-panel oak or maple doors show up in a lot of older Los Angeles-area kitchens. Each of those needs a different repair approach, and mixing them up wastes your money.
We fit quality parts that match KraftMaid’s drilling and hinge patterns so doors and drawers stay aligned and look original. That’s not just cosmetic. A glide with the wrong mounting pattern throws the drawer face out of plane against the face frame, and you’re back where you started. Warranty-safe service means we don’t do anything to the cabinet box that would reasonably void the manufacturer’s coverage on the product itself, and we document what we found and what we changed.
We also handle the full kitchen scope around the cabinets. Countertops in Cambria, Silestone and Caesarstone. Fixtures from Kohler, Moen, Delta and Blanco, each carrying its own manufacturer warranty. One contractor, one point of contact, from the cabinet box to the countertop edge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Inglewood
The failures we see on KraftMaid cabinets are predictable once you know the construction. Here’s what actually goes wrong, and why.
- Swollen, delaminating particleboard at sink bases and dishwasher openings. Vantage-series boxes are particleboard, and particleboard doesn’t forgive water. A slow supply-line weep or a dishwasher door that vents steam into the cabinet cavity gets absorbed, the board swells, and the laminate skin lifts. By the time a homeowner notices, the base is usually soft to the touch. We probe the box before recommending anything, because a swollen base can’t be saved with hardware.
- Soft-close drawer glides losing dampening or failing outright. Older units are the usual culprits. The dampener wears, the drawer slams, then the glide binds and the drawer sags and rubs the face frame. Sometimes it’s the glide; sometimes it’s the mounting screw holes that have enlarged in the particleboard. We check both.
- Painted and glazed finishes checking, yellowing or flaking. Maple and MDF doors near range hoods and sun-blasted windows take the worst of it. Cooking grease films the surface, heat cycles it, and UV from a west-facing window breaks down the topcoat. Inglewood’s marine layer moisture doesn’t help either.
- Face-frame stiles and toe kicks pulling away from the wall. This one is an Inglewood housing story. Homes from the 1920s through the 1950s settle, and a cabinet anchored to a wall that has moved will rack. Doors and drawers go out of alignment across a whole run, and re-hanging hardware alone won’t fix it. The boxes have to be shimmed and re-secured to the wall first.
- Salt-air corrosion on exposed hinges and pulls. Inglewood sits in the South Bay coastal plain, just inland from the coast. West-facing kitchens catch marine moisture, and plated hardware pits and stiffens over time. We see it on cabinet hardware as often as on exterior fixtures.
KraftMaid Parts & Our Repair-vs-Replace Approach

We use OEM KraftMaid hinges, glides and touch-up and finish kits when the box is sound. Matching the brand’s drilling pattern and finish is what keeps doors and drawers aligned and looking original. We do not stock, carry or order genuine KraftMaid parts as a standing inventory, and we are not a KraftMaid dealer. What we do is source quality parts that fit your specific cabinets and install them correctly.
The repair-or-replace call comes down to the box. If the particleboard has taken on water and swelled at a sink base or dishwasher opening, replacement of that base is the honest answer. Same when a finish is failing across an entire run of doors: chasing individual touch-ups on ten doors is throwing money at a problem that won’t stay fixed. But a sound box with worn glides and a racked face frame is a repair, and often a reface if the doors are tired but the carcass is solid.
That assessment is what the free estimate is for. Call (844) 320-4724 and we’ll tell you what you’re actually dealing with.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We open every drawer and door, probe the sink base and dishwasher opening for soft board, check the face frame against the wall for racking, and test each glide and hinge. In Inglewood’s older homes we also look at whether the wall itself has moved, since that changes the fix.
- 2
Scope and estimate. You get a written, line-item estimate covering parts, labor and any refacing or replacement. The written estimate sets the final price. If a permit is needed for the broader remodel, we flag it here rather than mid-job.
- 3
Repair or installation. Boxes get re-hung and shimmed. Worn glides and hinges get replaced with parts matching KraftMaid’s drilling. Swollen bases come out and new ones go in. Refacing follows, then countertops go on top of a level, secured cabinet run.
- 4
Test and align. Every drawer and door gets cycled and adjusted for consistent gaps, soft-close function and clearance past the face frame before we call it done.
- 5
Warranty and handover. You get the parts coverage and our workmanship warranty in writing, plus the manufacturer warranty documentation on any countertop or fixture we installed.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Inglewood

We service and install KraftMaid cabinetry across the full kitchen scope: base cabinets, wall cabinets, tall pantry and oven cabinets, sink bases, drawer stacks and islands. That covers framed Vantage-series boxes, the Momentum and Momentum Pro modular and semi-custom lines, and all-plywood Insight full-overlay installations. We handle door and drawer alignment, glide and hinge replacement, box re-securing, toe kick and face frame repair, refacing, and touch-up on painted and glazed finishes.
Around the cabinets, we install and replace countertops, backsplashes and kitchen islands, and we can build the layout around the cabinets rather than around a stock footprint. If your KraftMaid run needs a different configuration, that’s a design and layout conversation we handle in the same visit.
We Also Service These Brands
KraftMaid is one cabinet brand among the 50+ named manufacturer partners in our material lineup, and we work across competing brands in every category so you choose by design, warranty tier and budget rather than by what one supplier happens to carry. Alongside KraftMaid cabinetry, we service Kohler fixtures, GAF roofing, PGT windows and doors, and Master Halco fencing. Same contractor, same written estimate, whether the project is a kitchen, a roof or a fence line.
FAQs – KraftMaid Construction Service in Inglewood
Is Construction Inglewood authorized by KraftMaid? No. We are an independent service provider, not a KraftMaid dealer, and we have no manufacturer affiliation or authorization from KraftMaid. We service and install KraftMaid cabinetry using quality parts that fit it.
Do you use quality parts that fit KraftMaid equipment? Yes. We use OEM KraftMaid hinges, glides and finish kits when the cabinet box is sound, because matching the brand’s drilling and finish keeps doors and drawers aligned and original-looking. Where a box has taken on water, we’ll say so instead of selling you parts that won’t fix it.
How long does KraftMaid service take? Hardware and alignment work on a short run of cabinets is typically a single visit. Refacing or base cabinet replacement runs longer, and a full kitchen with countertops is a multi-visit job scoped in the written estimate. Plan check in Inglewood can add time when a permit is involved, given the permitting backlog from stadium-area construction volume.
What kinds of KraftMaid products do you cover? Base, wall, tall and island cabinetry across framed and full-overlay construction, including Vantage, Momentum, Momentum Pro and Insight lines. We handle doors, drawers, glides, hinges, box repair, refacing and finish touch-up.
Will service void my KraftMaid warranty? Our work shouldn’t void the manufacturer’s coverage on the cabinet itself, and we don’t modify boxes in ways that would. We document what we found and what we changed so you have a record. Read your KraftMaid warranty terms for the specifics of your product.
How much does KraftMaid construction cost in Inglewood? Typical estimated ranges: cabinet installation $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash $800 – $2,500, island installation $3,000 – $10,000, and a full kitchen remodel $14,000 – $45,000. These are estimates; the written estimate sets the final price. Call (844) 320-4724 for an exact quote – estimates are free.
| KraftMaid Kitchen Service | Typical Estimated Range in Inglewood |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Kitchen Remodel | $14,000 – $45,000 |
Book Your KraftMaid Service in Inglewood, CA
If your KraftMaid cabinets need attention, we’ll give you a straight assessment and a written line-item estimate before any work starts. Licensed and insured, free estimates, workmanship warranty on what we install. Call (844) 320-4724. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Inglewood.












