







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Inglewood Homeowners Choose PGT Construction
We provide independent PGT construction service in Inglewood, repairing and installing PGT’s impact-rated windows and doors with parts that fit the equipment and respect the impact rating. What makes our PGT work different is that we treat the window as a rated system, not a piece of glass: seal failure, hardware wear and frame condition all get checked before we recommend anything. PGT is a Florida-based manufacturer, and its impact-rated windows and doors are increasingly specified in Inglewood and South LA for their windborne-debris and acoustic performance.

To be clear: we are an independent service provider. Construction Inglewood is not affiliated with or authorized by PGT, and we don’t claim to be. What we bring is familiarity with the differences between PGT’s vinyl and aluminum lines, and a repair-first mindset that keeps an existing installation working. Our technicians have up to 14 years of experience.
Inglewood homeowners call us because one contractor can cover the window, the roof above it and the bathroom inside it. Call (844) 320-4724 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Trust Construction Inglewood for Your PGT Construction?

PGT makes two structurally different window families in residential work, and the service approach differs with each. The WinGuard Impact-Resistant Vinyl line depends on a vinyl frame, a laminated impact glass unit and gasketing that all have to stay in tolerance. The Aluminum Series (WinGuard Aluminum) depends on a stiffer frame profile and finish integrity, where sealant joints and drainage do more of the work. Anyone touching either one should know which they’re looking at before ordering parts, because replacing a vinyl sash the same way you’d service an aluminum one gets you callbacks.
We also respect the rating. On impact products, the glass interlayer, the sash profile and the hardware are a matched assembly. Swapping in a generic lock or roller that doesn’t match profile and finish can compromise the assembly’s performance, so we prefer parts that fit the specific PGT system we’re working on and match the existing component. Non-structural hardware has more room for aftermarket options; rated components don’t.
Our technicians have up to 14 years of experience across vinyl and aluminum window systems, sliding glass doors and the surrounding envelope. We work with a written line-item quote, and the written estimate sets the final price before anything starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Inglewood
Here’s what we actually see on PGT window and door work in Inglewood, and what causes each one.
- Vinyl frame warping and seal failure on west- and south-facing windows. Inglewood’s west-facing exposures take direct afternoon sun plus salt-laden marine air, and the heat cycling is hard on vinyl frames and the perimeter seals around the glass. When the seal lets go, the insulated glass unit fogs from the inside and you can’t clean it out. That’s a failed IGU, not dirt.
- Hardware failure on sliding glass doors. Rolls flat-spot, tracks fill with grit, and the door starts dragging or sticks halfway. A door that no longer seats fully in its track can’t drain properly, which is how water starts showing up at the threshold after heavy rain.
- Impact glass laminate edge seal degradation or interlayer bubbling. Years of heat cycling can degrade the laminate edge seal on impact glass, and that compromises the very thing the glass was installed for. It’s a slow failure, easy to miss until you look at the glass edge closely.
- Aluminum frame finish fading and chalking. The aluminum line holds up structurally, but coastal exposure dulls and chalks the finish on exposed faces. Cosmetic on its own, but it’s a signal to check the joints.
- Sealant joint failure at rough openings. This is the quiet one. The window can be fine and water still gets in around the frame during a hard rain, because the seal at the rough opening has aged out.
Most of these show up first as a symptom a homeowner notices before a technician does: condensation between panes, or a sliding door that no longer glides. A typical job starts there. A qualified independent technician verifies the impact rating, identifies whether the failure is glass, hardware or seal, and then either orders a matching IGU or hardware kit, or reseals and adjusts the frame to restore performance without full replacement.
PGT Parts & Our Repair-vs-Replace Approach

On PGT windows and doors, OEM replacement IGUs, rollers, locks and weatherstrip are the first choice, because they maintain the impact rating and the fit of the original assembly. We don’t claim to stock genuine PGT parts or to be a dealer; we source what fits the system and match profile and finish wherever the component is visible or structural. Aftermarket hardware is reasonable for non-structural parts that don’t affect the rating.
Repair versus replace comes down to scope. When frame or glass damage is isolated to one or two units, repair is typically the better use of money and keeps the rest of the installation intact. When seal failure is widespread across a wall of windows, or frames have warped enough that sashes no longer sit true, replacement with a comparable rated product is the honest recommendation. We’ll tell you which one you’re looking at, with a written line-item quote either way. Call (844) 320-4724 for an exact quote; estimates are free.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the specific PGT product in place (vinyl impact, aluminum or non-impact vinyl), confirm the impact rating where applicable, and test the failure directly: glass edge and interlayer condition, roller and track wear, lock engagement, and moisture at the rough opening.
- 2
Repair or install. For a failed IGU, we measure and order a matching unit. For hardware, we replace rollers, locks or weatherstrip with parts that match the profile. For an install, we set and shim the unit square, seal the perimeter correctly for wind-driven rain and check that the door or sash drains.
- 3
Test. We operate the moving parts through full travel, check that locks engage and that the sash seats, and water-test the perimeter where the seal was disturbed. A sliding door that doesn’t seat fully is a water problem waiting to happen.
- 4
Warranty and paperwork. The component carries its own manufacturer warranty, and you get the write-up of what was replaced and what was left in place, so a future service call starts with information instead of a guess.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Inglewood

We service and install PGT impact-resistant vinyl windows, the aluminum line, sliding glass doors and standard non-impact vinyl windows. That covers the common Inglewood situations: a fogged IGU in a west-facing bedroom window, a sliding glass door that no longer glides to the patio, and a full window replacement where a set of units has aged out together.
Inglewood’s position just inland from the coast means marine layer moisture and occasional Santa Ana winds, and impact-rated products are increasingly specified here for windborne debris and sound. We’ll also tell you honestly when the surrounding conditions matter more than the window: if the roof above a leaking window is the actual problem, roof repair belongs in the scope. Window replacement typically runs $4,500 – $15,000, and roof repair $400 – $1,800, estimated and set final by the written quote.
We Also Service These Brands
We’re a full-scope residential contractor, so a single brand never defines the work. Alongside PGT windows and doors, we install and service KraftMaid cabinetry, Kohler fixtures, GAF roofing systems and Master Halco fencing. One contractor from the driveway to the ridge line means you aren’t coordinating a window installer, a roofer and a bath specialist on the same house, and you still choose the material and the warranty tier. Call (844) 320-4724 to talk through a whole-property scope.
FAQs – PGT Construction Service in Inglewood
Is Construction Inglewood authorized by PGT?
No. We are an independent PGT service provider and have no affiliation with or authorization from PGT. We repair and install PGT products using parts that fit the equipment; we are not a dealer and don’t present ourselves as manufacturer-certified.
Do you use quality parts that fit PGT equipment?
Yes. On PGT windows and doors we prioritize OEM replacement IGUs, rollers, locks and weatherstrip to maintain the impact rating and fit, and use aftermarket hardware only for non-structural parts where profile and finish can be matched.
How long does PGT service take?
A single IGU or hardware repair is usually the shorter job; a full window replacement takes longer because units are ordered to fit and the perimeter has to be sealed and tested. You’ll get the timeline in the written quote before work starts. Call (844) 320-4724 for an exact quote; estimates are free.
What kinds of PGT products do you cover?
We cover PGT’s impact-resistant vinyl windows, its aluminum windows, sliding glass doors and standard non-impact vinyl windows, including glass unit replacement, hardware service, resealing and full replacement of like-rated units.
Will service void my PGT warranty?
Not when service follows the manufacturer’s guidance and uses parts that fit the system. We keep the impact assembly intact, document what was replaced, and leave the component’s own manufacturer warranty in force. Call (844) 320-4724 to book an evaluation; estimates are free.
How much does PGT construction cost in Inglewood?
Typical estimated ranges here are $4,500 – $15,000 for window replacement and $400 – $1,800 for roof repair, with the written, line-item estimate setting the final price. Call (844) 320-4724 for an exact quote; estimates are free.
Book Your PGT Service in Inglewood, CA
If your PGT windows are fogging, your sliding door is dragging or a west-facing frame has aged out, we can take a look and tell you plainly whether it’s a repair or a replacement. Call (844) 320-4724 to schedule your free estimate in Inglewood. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Inglewood.












